immagine casa per indicare la Home page Ti trovi in: Home >> Ricerca  >> Archivio OAB immagine bandiera inglese immagine bandiera italiana
Cerca 
 
    Solo autori OAB     La lista e` ordinata per I.F. in senso decrescente.
Documenti in archivio: 53   -   Autore: Salmaso, B
1/1 pag.
    Totals
  • ∑Authors OAB/Tot.: 210 / 328
  • Percentage OAB_Authors: 64.02%
  • ∑citations: 0
  • ∑I.F.: 0
  • ∑ I.F. / n. publications: 0

7. TECHNICAL REPORTS

Acceptance tests and calibration of the Explorer Atomic Force Microscope new head

Salmaso, B. , Spiga, D.

2015, INAF/OAB internal report 02/2015
AFM analysis of test wafers coated with Cr-Ni-Au layers: roughness characterization

Salmaso, B. , Spiga, D.

2012, INAF/OAB technical note 01/2012
BEaTriX: vibrations campaign on the laboratory ground

Salmaso, B. , Spiga, D. , Basso, S. , Giro, E., Pareschi, G. , Tagliaferri, G.

2018, INAF/OAB technical report 03/2018
BEaTriX X-ray facility for testing ATHENA mirror modules: a white paper for the implementation

Spiga, D. , Pareschi, G. , Salmaso, B. , Tagliaferri, G.

2017, INAF/OAB technical report 02/2017
pdf icon   Characterization of slumped glasses for the IXO backup optics project, phase 2

Spiga, D. , Proserpio, L. , Pagano, G., Salmaso, B.

2011, INAF/OAB internal report 05/2011
pdf icon   Characterization of the profiles of slumped glass foils after cutting and annealing

Holyszko, J., Salmaso, B. , Civitani, M.

2015, INAF/OAB internal report 13/2015
Characterization of the Silicon cylindrical slumping mould polished by HELLMA

Salmaso, B. , Brizzolari, C., Civitani, M. , Spiga, D.

2014, INAF/OAB internal report 11/2014
Characterization of the Zerodur K20-20B cylindrical slumping mould polished by HELLMA

Salmaso, B. , Brizzolari, C., Arcangeli, L, Rossi, M., Spiga, D.

2015, INAF/OAB internal report 03/2015
Characterization of the Zerodur K20-20 cylindrical slumping mould polished by HELLMA

Salmaso, B. , Brizzolari, C., Spiga, D. , Rossi, M., Arcangeli, L.

2014, INAF/OAB internal report 01/2014
pdf icon   Cleaning of Ruths primary mirror

Salmaso, B. , Crimi, G.

2014, INAF/OAB internal report 04/2014
pdf icon   Cleaning of Ruths primary mirror: 2016

Salmaso, B. , Crimi, G.

2016, INAF/OAB internal report 09/2016
Coating samples for the BEaTriX mirrors: surface roughness analysis

Spiga, D. , Salmaso, B. , Vecchi, G.

2021, INAF-OAB internal report 01/2021
pdf icon   Detecting the mitigation of fused silica roughening after Ion Beam Figuring

Holyszko, J., Salmaso, B. , Ghigo, M. , Arcangeli, L., Passaretti, F., Spiga, D.

2017, INAF/OAB technical report 05/2017
pdf icon   Electroformed nickel samples for the polarimetric LAMP X-ray telescope: sample roughness characterization

Tayabaly, K., Spiga, D. , Salmaso, B. , Valsecchi, G., Banham, R., Missaglia, N., Pareschi, G. , Tagliaferri, G.

2014, INAF/OAB internal report 05/2014
Engineering Models for SIMBOL-X Phase A: metrological and X-ray analyses post PANTER tests

Spiga, D. , Sironi, G. , Salmaso, B. , Romaine, S., Bruni, R., Cotroneo, V. , Mattarello, V., Garoli, D.

2009, INAF/OAB internal report 07/2009
Fine-tuning of slumped AF32 glasses on a Zerodur K20 mould

Salmaso, B. , Spiga, D.

2013, INAF/OAB internal report 14/2013
From AF32 to Eagle XG: characterization of glasses slumped on Zerodur K20-10 mould

Salmaso, B. , Brizzolari, C., Spiga, D.

2014, INAF/OAB internal report 02/2014
pdf icon   Fused Silica thin segments for X-ray telescopes: status of the process at OAB.

Salmaso, B. , Basso, S. , Civitani, M. , Ghigo, M. , Pariani, G. , Spiga, D. , Vecchi, G. , Arcangeli, L., Ritucci, A., Rossi, M., Pareschi, G. , et al.

2017, INAF/OAB technical report 10/2017
Hard X-ray mirrors for NHXM: reflectivity and roughness characterization of mirror shell samples

Salmaso, B. , Raimondi, L., Negri, R., Spiga, D. , Binda, R., Orlandi, A., Valsecchi, G.

2011, INAF/OAB internal report 02/2011
High-resolution X-ray scattering measurement of slumped glasses

Spiga, D. , Raimondi, L., Salmaso, B. , Civitani, M. , Pagano, G., Basso, S. , Ghigo, M. , Proserpio, L.

2011, INAF/OAB internal report 04/2011
pdf icon   Ion Beam Figuring of thin Fused Silica flat wafers

Salmaso, B. , Ghigo, M.

2017, INAF/OAB technical report 11/2017
IXO backup optics with slumped glasses: PANTER test of the Proof of Concept #2 optic

Spiga, D. , Civitani, M. , Proserpio, L. , Salmaso, B. , Basso, S. , Burwitz, V., Menz, B., Hartner, G., Budau, B.

2013, INAF/OAB internal report 10/2013
IXO back-up optics with slumped glasses: Proof of Concept (PoC) tests at PANTER and INAF/OAB

Spiga, D. , Salmaso, B. , Proserpio, L. , Ghigo, M. , Basso, S. , Civitani, M. , Pareschi, G. , Sironi, G. , Pagano, G., Zambra, A., Burwitz, V., et al.

2012, INAF/OAB internal report 04/2012
IXO back-up optics with slumped glasses: XOU-BB tests at PANTER and INAF/OAB

Spiga, D. , Civitani, M. , Proserpio, L. , Ghigo, M. , Basso, S. , Salmaso, B. , Pareschi, G. , Zambra, A., Pagano, G., Burwitz, V., Menz, B., et al.

2012, INAF/OAB internal report 05/2012
IXO glasses cleaning procedure after slumping: removing residuals affecting the high frequency region

Salmaso, B. , Bianco, A. , Proserpio, L. , Ghigo, M. , Spiga, D.

2013, INAF/OAB Internal report 01/2013
IXO slumped glasses D5 and D7: analysis of spatial wavelength impact on the Point Spread Function by means of the Fresnel diffraction

Raimondi, L., Spiga, D. , Salmaso, B. , Civitani, M. , Pagano, G., Basso, S. , Ghigo, M. , Proserpio, L.

2011, INAF/OAB internal report 03/2011
LTP and ZYGO comparison of the profile measurements of MK20-20B slumping mould

Salmaso, B. , Brizzolari, C., Pariani, G. , Spiga, D.

2015, INAF/OAB internal report 04/2015
LTP profiles of AF32 glasses with FEA correction: a method to remove spurious mid-frequency errors

Salmaso, B. , Basso, S. , Spiga, D.

2013, INAF/OAB internal report 12/2013
Maintenance of the BEaTriX facility: MPT 200 Vacuum sensors

Sisana, D. , Salmaso, B.

2023, INAF/OAB internal report 05/2023
Modeling and measurement of the scattering properties of the source pinhole in the BEaTriX facility

Spiga, D. , Salmaso, B. , Basso, S.

2021, INAF/OAB internal report 04/2021
New input for the assessment of the BEaTriX design

Salmaso, B. , Spiga, D. , Basso, S. , Pelliciari, C., Giro, E., Pareschi, G. , Tagliaferri, G.

2018, INAF/OAB technical report 04/2018
Optical simulations for the BEaTriX X-ray facility: a brief performance and alignment tolerance study

Spiga, D. , Salmaso, B. , Tagliaferri, G. , Pareschi, G. , Pelliciari, C.

2018, INAF/OAB technical report 01/2018
Optimization of the slumping process of Eagle XG on Zerodur K20: fine tuning for the production of POC#4 glass foils

Salmaso, B. , Basso, S. , Brizzolari, C., Civitani, M. , Spiga, D.

2015, INAF/OAB internal report 01/2015
pdf icon   Performance predictions for the BEaTriX expanded beam

Spiga, D. , Salmaso, B. , Sironi, G. , Ghigo, M. , Cotroneo, V. , Vecchi, G.

2022, INAF/OAB technical report 03/2022
Performed tests of the BEaTriX CCD#2

Sisana, D. , Salmaso, B. , Basso, S. , Ghigo, M. , Spiga, D. , Uslenghi, M.

2023, INAF/OAB internal report 04/2023
Profile and roughness metrology of slumped glasses for the "IXO back-up optics" project

Spiga, D. , Proserpio, L. , Salmaso, B. , Ghigo, M. , Friedrich, P., Vongehr, M., Winter, A., Basso, S. , Civitani, M. , Gallieni, D., Tintori, M., et al.

2013, INAF/OAB internal report 15/2013
Proof of Concept No. 2 optic with slumped glasses: tests in focus at PANTER

Spiga, D. , Civitani, M. , Burwitz, V., Burkert, W., Menz, B., Hartner, G., Salmaso, B. , Basso, S. , Pareschi, G. , Tagliaferri, G. , Ghigo, M. , et al.

2014, INAF/OAB internal report 03/2014
Reflectivity and stress characterization of W/Si and Pt/C multilayer samples for the New Hard X-ray Mission phase B development

Spiga, D. , Raimondi, L., Salmaso, B. , Negri, R.

2010, INAF/OAB internal report 03/2010
Roughness characterization of an SPO sample with AFM: optical side and non-optical side in the inter-rib region

Salmaso, B. , Spiga, D.

2017, INAF/OAB technical report 08/2017
Roughness measurements on the BEaTriX parabolic mirror during the pitch polishing process

Salmaso, B. , Cotroneo, V. , Vecchi, G. , Basso, S. , Spiga, D.

2020, INAF/OAB internal report 03/2020
Simulations for the 1.49 keV and 6.4 keV beamlines of BEaTriX N. 2

Spiga, D. , Salmaso, B. , Basso, S.

2023, INAF-OAB Technical Report 03/2023
Slumping Eagle XG on new Zerodur K20 MK20-20 mould

Salmaso, B. , Brizzolari, C., Civitani, M. , Sanvito, G., Spiga, D.

2014, INAF/OAB internal report 15/2014
Sticking of Eagle glass on Zerodur K20-20 mould: failure analysis

Salmaso, B. , Brizzolari, C.

2014, INAF/OAB internal report 06/2014
Technical Demonstrator Model no.2 for NHXM: metrological analysis performed at OAB

Spiga, D. , Raimondi, L., Salmaso, B. , Basso, S. , Marioni, F., Orlandi, A.

2011, INAF/OAB internal report 07/2011
Test plan of the BEaTriX paraboloidal mirror at PANTER

Spiga, D. , Salmaso, B. , Basso, S. , Sironi, G. , Ghigo, M. , Vecchi, G. , Cotroneo, V. , Pareschi, G. , Tagliaferri, G.

2021, INAF/OAB internal report 02/2021
Test results of the BEaTriX paraboloidal mirror at PANTER

Spiga, D. , Salmaso, B. , Basso, S. , Sironi, G. , Ghigo, M. , Vecchi, G. , Cotroneo, V. , Pareschi, G. , Tagliaferri, G. , Burwitz, V., Hartner, G., et al.

2021, INAF/OAB technical report 03/2021
The BEaTriX collimating mirror: metrology with LTP at ELETTRA

Spiga, D. , Raimondi, L., Gerusina, S., Simoncig, A., Salmaso, B. , Basso, S. , Ghigo, M. , Sironi, G. , Vecchi, G.

2020, INAF/OAB internal report 2020/01
The BEaTriX parabolic mirror: manufacturing tolerances and expected results in UV and X-ray illumination

Salmaso, B. , Spiga, D.

2018, INAF/OAB technical report 05/2018
The CCD camera of the BEaTriX facility: dark frames characterization and photon counting

Sisana, D. , Tentori, N. , Salmaso, B. , Spiga, D. , Basso, S. , Uslenghi, M.

2023, INAF/OAB internal report 02/2023
X-ray optics with slumped glasses: High-resolution metrology with CUP of AF32 slumped glasses

Civitani, M.M. , Salmaso, B. , Proserpio, L. , Pareschi, G.

2015, INAF/OAB internal report 12/2015
pdf icon   X-ray scattering measurements of Fused Silica samples after Ion Beam Figuring

Salmaso, B. , Spiga, D.

2017, INAF/OAB technical report 06/2017
X-ray tests at PANTER on the TDM2 optic prototype for the New Hard X-ray Mission

Spiga, D. , Raimondi, L., Salmaso, B. , Valsecchi, G., Orlandi, A., Borghi, G., Binda, R., Basso, S. , Borrelli, D., Marioni, F., Ferretti, L., et al.

2010, INAF/OAB internal report 06/2010
X-ray tests at PANTER on the TDM3 optic prototype for the New Hard X-ray Mission

Raimondi, L., Salmaso, B. , Spiga, D. , Valsecchi, G., Orlandi, A., Borghi, G., Rossi, M., Marioni, F., Basso, S. , Burwitz, V., Freyberg, M., et al.

2011, INAF/OAB internal report 06/2011